The DCT10 RS is rugged, cylindrical pencil shaped air ionization chamber for CTDI measurements. The CT probe is intended for measuring and monitoring the exposure output level of CT scanners in a phantom or in air. CT dose index, CTDI, can be measured in accordance with IEC 61223-2-6.
The DCT10 RS can be connected via Chamber Adapter to the Piranha to measure CT dose.
| Dose Rate | 80 µGycm/s to 8 Gycm/s |
| Inaccuracy | ±6 % or ±0.080 mGycm/s |
The DCT10 RS can be connected directly to the Barracuda (via an electrometer module supporting bias) to measure CT dose. Barracuda has built-in functions to simplify measurements of CTDI (CT dose index).
| Dose | 40 nGym-350 kGym |
| 4 µGycm-35 MGycm |
|
| Dose rate | 1.6 µGym/s-70 kGym/s |
| 160 µGycm/s-7kGycm/s | |
| Inaccuracy | ±5 % or 16 µGycm/s |
The DCT10 RS can be connected directly to the Solidose 400 to measure CT dose.
| Dose | 20 µGycm - 400 kGycm ±5 % |
| 2.3 mRcm - 46 MRcm | |
| Dose rate | 200 µGycm/s - 600 Gycm/s ±5 % |
| 1.4 Rcm/min - 4 MRcm/min |
| Connector type |
LEMO triaxial |
| Cable |
2 m, low noise triaxial |
| Active volume |
4.9 cm3 |
| Active length |
100 mm |
| Inner diameter |
8.0 mm |
| Typical leakage |
±4 fA |
| Radiation quality | 80 - 150 kV |
| Sensitivity |
40 nC/Gycm or 400 nC/Gy |
| 0.35 nC/Rcm or 3.5 nC/R |
Please enter your user name and password below.
If you are the proud owner of a Barracuda, Piranha, or Nova you just have to enter your serial number as the user name and leave the password box empty.